QR code not scanning: causes and fixes | 1li.ch Skip to content

Your QR code will not scan or leads to an error: causes and fixes

When a QR code does not work there are two very different cases: the phone cannot read it (a printing problem), or it reads it but opens the wrong page or an error (a link problem). Work out which one you have and go to the right section.

Five examples: one readable QR code and four mistakes, namely low contrast, inverted colours, logo too big, no margin

The phone cannot read the code

  1. Contrast: light modules on a light background, or inverted colours (light on dark), confuse many phones. Create the QR code again with dark modules on a light background.
  2. Size: the side should be at least one tenth of the scanning distance. Below 2 cm it is almost always too small.
  3. Logo too big: it covers too many modules. Shrink it or raise the error correction.
  4. No margin: the code needs clear space around it. If it touches an edge or a photo, move it.
  5. Print: smudges, shiny paper reflecting the light or a fold across the code. Do a new test print.
  6. Pixelated file: a small PNG blown up becomes blurry. Use the SVG.

The QR code scans but leads to an error

If your QR code is dynamic or points to a short link, the problem is almost always in the link.

  1. Scan the QR code and look at the address that opens.
  2. Open the Links list in your dashboard and find the short link with that alias.
  3. Check that it is active (switch on).
  4. Check that the alias has not changed: the printed QR code contains the old address.
  5. In the link settings, look at the schedule: an end date in the past or a reached click limit stop the link.
  6. Check the long URL: if the destination site has moved or is offline, update the destination and save.
    Editing the short link behind the QR code: change the long URL, keep the alias

If you deleted the link or changed the alias

Create a short link with exactly the same alias as before and the right destination: the printed QR code works again. If another link already uses that alias, free it first.

A static QR code already printed with a wrong address

A static QR code contains the final address itself: it cannot be corrected from 1li.ch. You can only reprint, this time with a dynamic QR code, or stick a label with the new code over the old one.

Prevention

  • Always test a printed copy with two phones before the print run.
  • Use a dynamic QR code for printed material.
  • Write the short link under the QR code too, for people who cannot scan.

Related articles

Was this information helpful to you?

Share:

Black Friday until 6 December

50% off any plan, forever

With the code BF50 you pay half on monthly, yearly and lifetime plans. On subscriptions the discount stays at every renewal.

BF50
00days
00hours
00min
00sec

Pick a plan above and the code is applied for you. Otherwise enter BF50 at checkout, under «I have a discount code...». Compare the plans